Rig 15

Rig 15

A Highly Mobile Drilling Rig Capable of Working Efficiently in Extreme Arctic Conditions

Rig 15

DDI Rig 15 consists of two integrated, self- propelled modules for maximum operational and moving efficiency. The substructure module is 132 feet long by 50 feet wide, and has a cantilevered drillfloor capable of ten foot well spacing. The substructure ground level contains the power generators, SCR bays, steam boilers, support equipment, moving hydraulics, main fuel tank and wheel assemblies. The second level of the substructure module contains the pipe shed and pipe skate assembly. The third level comprises the rig floor, drilling equipment, doghouse and mast. The second module is the mud processing facility, which measures 96 feet long by 50 feet wide. The mudpit module ground level contains the triplex mud pumps, centrifugal pumps, mud tanks, air compressors, moving generator, and wheel assemblies. The second level of this module consists of the remainder of the pipe shed, solids control equipment, sack room, and mud lab.

The rig is self-moving, utilizing a sophisticated Columbia hydraulic wheel system capable of 2.5 mph over level roadways. On well-to-well moves the mast remains standing, which decreases moving time. For longer moves the mast can be lowered on a substructure support cradle. The mast hoisting capability is 1,000,000 lbs. with a twelve-line hook-up, and the substructure is capable of a simultaneous combined load of 650,000 lbs. for pipe set back and 750,000 lbs. rotary table load.


Hoisting / Rotary Equipment

  • Prime Movers: 1 each Cat 3512 C
  • Available HP: 7,926 bhp @ 51,912 kW
  • Mast capacity: 1,000,000 lb
  • Set Back Capacity (lb): 650,000 lb
  • Setback: 215 stands, 5″ DP and 10 stands, 8″ DC
  • Rotary Table: Continental Emsco, T-3750, 37 1/2″ opening
  • Rotary Table Torque: Hydraulic motor capable of 20,000 ft/lbs torque
  • Mud Pumps: 2 each Skytop Brewster, B-1600T triplexes
  • Pump Liner Sizes Available: 5″, 5 1/2″, 5 3/4″, 6″, 6 1/2″, 6 3/4″, 7″
  • Corresponding Working Pressure (psi): 5000, 5000, 5000, 4665, 3981, 3688, 3423
  • Drawworks: Skytop Brewster, Model NE-12
  • Top Drive: Varco 8SA capable of 63,000 ft/lbs continuous torque

Mud System / Solids Control

  • Scalping Shakers: 2 each Derrick, model 48, Flo Line Cleaners
  • Linear Motion Shakers: 3 each Derrick, model 514, Flo Line Cleaners
  • Number of Pits: 10 each with total volume – 1250 bbl
  • Desilter: 1 each Derrick, Twenty cone Desilter

Blowout Prevention Equipment

  • Diverter: Hydril MSP, 20 1/4″, 2000 psi, flanged
  • Annular: Hydril GK, 13 5/8″, 5000 psi
  • Rams: 2ea., Hydril MPL, single, 13 5/8″, 5000 psi
  • Shear Ram: 1ea., Hydril MPL, 13 5/8″, 5000 psi
  • Choke Manifold: 5000 psi system

Modules

  • Number of modules (excluding camp): 2
  • Number self- propelled: 2

General Rig Moving Information

  • Average move time well-to-well: 16 hours
  • Maximum load: substructure fully loaded 2,755 kips

Dimension Capabilities

  • Minimum well spacing: 10′ GL to floor: 40′-6″ w/mat